Samsung Galaxy S, MIUI Jelly Bean Rom 2.8.17 by muchopoli83

Rom Miui Jelly Bean by muchopoli83

We already have the first rom here Miui with based on Android 4.1.1 Jelly Bean for our Samsung Galaxy S model GT-I9000.

The rom created by the prestigious chef a lotpoli83, from the development forum HTCmania, is translated in its entirety into Spanish, in addition, it received the invaluable collaboration and advice from the great elitemovil, at the same time that he has guided him in the creation of the rom and given his base rom for the realization of this sensational port.

Rom highlights

  • Port MIUIv4.1 Jelly Bean 2.8.17 direct from the Nexus S to the Samsung Galaxy S from the original Chinese rom, to which it has been deodexed and translated into Spanish.
  • Framework and RIL optimized for perfect operation on our Android terminal.
  • Internal and external memory cards working perfectly, and being detected by the PC.
  • Base for jRO03L 10 RC from master @elitemovil
  • Kernel Semaphore Jelly Bean 2.0.6
  • Unnecessary apps removed from rom to free up space on system.
  • Nexus S KF1 Modem
  • Wifi Thetering working without problems.
  • AriesPart application installed as standard.
  • Jelly Bean roms own photo gallery
  • AOSP Jelly Bean Camera
  • DPI to 210

Necessary requirements to install this rom

Rom Miui Jelly Bean by muchopoli83

As I always advise you, and to avoid malfunction problems and forced closings of applications, it is essential do a clean install of the rom starting from the JVU android base.

Once the advice of how to install a rom cleanly, we must check that we have the battery fully charged and the usb debugging activated from the device settings menu.

Files needed to install the rom

Rom Miui Jelly Bean by muchopoli83

The files necessary to install this rom are limited to a compressed zip file that we will download and we will copy without decompressing directly to the root of the sdcard of the device to flash.

Once this is done we can turn off the terminal and restart it in recovery-mode to proceed with the installation of the rom.

Rom installation process

Once rebooted in Recovery Mode we will proceed as follows:

  • Wipe data factory reset
  • Wipe cache partition
  • Advanced / wipe dalvik Cache
  • Go Back
  • Install zip from sdcard
  • choose zip
  • We select the zip of the rom and install it.

At this point the terminal will restart immediately and enter Boat, we will remove the battery for about ten seconds, put it back in and re-enter Recovery Mode to continue with the next steps:

  • Wipe data factory reset
  • Wipe cache partition
  • Advanced / wipe dalvik cache
  • Go Back
  • Install zip from sdcard
  • choose zip
  • We select again the zip of the rom and confirm its installation.
  • Reboot system now

If we come from another rom Jelly BeanAndroid 4.1.1, we will probably avoid the step of removing the battery since we almost certainly install the rom correctly in the first process.

Now have a little patience as the first reboot is somewhat expensive and it usually takes longer than necessary, but in the end it will rip you off and you can enjoy this beauty of rom.

More information - The first Nigthly's of CyanogenMod 10 (Android 4.1.1) are hereSamsung Galaxy S, how to install a Rom in a clean waySamsung Galaxy S, update via odin to firmware 2.3.6 and its CF Root

Download – MIUIv4.1 Jelly Bean 2.8.17


Follow us on Google News

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: Actualidad Blog
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.

  1.   Factor. said

    It looks deformed, like flat, hopefully it is just a mistake in terms of uploading the images, and not a disproportionate rom.

    1.    michael bilbao said

      friend does not serve the bluetooh

  2.   Oliver lopez said

    The link does not work

  3.   lucca69 said

    the link does not work from the beginning

  4.   Oliver lopez said

    what a shame it looks good

  5.   Oliver lopez said
  6.   Asturias said

    installing rom from scratch, for now everything fine, restarting, as francisco says, it takes a bit….,….,…, but finally it starts, cool unlocking, asks for pin code, I put it and change language completely, I deny google consent and let it start for about 5 minutes. It goes well, I modify the call sound, message and wallpaper, I install the google account and enter the play store, and I download titanium backup, the first time it gives me an error, the second time it seems to be installed, I open it and it tells me that I do not have permissions, that I am not rotated, that I do, thanks in advance, from what I have seen so far I like it.

    How do I rotate the phone for the titanium, thanks in advance, from Asturias

    1.    FranciscoRuizAntequera said

      In the Roms Miui you have to activate the Root permission from the settings, it is through a sliding button like the one for Wifi.

  7.   Asturias said

    Hello again, I have had some problems, some with the tones already solved from themes, and another that I have not been able to solve, which is the connection with the parrot 3100, I have not managed to connect them, they are found but they do not link, I don't know what do, thanks in advance from asturias

    1.    Francisco Ruiz said

      Now in a while I will try the new version to see how it goes and make a new post.

  8.   Asturias said

    We have a new version, MIUIv4.1 Jelly Bean 2.8.24
    I do not know whether to try it, what do you recommend Francisco, greetings from Asturias.

  9.   Asturias said

    Hello everyone, luckily the parrot was connected, with which I have one less problem, for now we are trying things little by little, a salutation, from Asturias

  10.   Fichovi said

    Every time I try to access the SMS, I get the following error:

    Unfortunately, Messages has stopped.

    Report MIUI or Accept

  11.   Francisco Jose Montero said

    I have a problem to see if you can help me, every time I install a rom in my galxy s I9000 (I do it from a clean installation) with android 4.1 base. Everything is fine but when I go to my country house, there I lose the signal, however if the ROM is ICS-based or lower, I do not lose the signal, (coverage I mean) What could this be due to? it happens to me with all. Thanks in advance

  12.   Theterrorist007 said

    it won't let me install it on my samsung captivate.

    1.    FranciscoRuizAntequera said

      It is for GT-I9000 model, not for the captivate pal

      1.    Theterrorist007 said

        hahaha FAIL all for not reading the first of the post xD
        to see if then one comes out for the captivate. I already got bored of the ics that I have

  13.   whitehunter2378 said

    Hi, I've been reading on the internet that the GT-I9000 model has many available roms, but the GT-I9070 model has none, do you know if there will be any roms for this model ???? Thanks.

  14.   white said

    I have installed it. very good interface and very careful to detail. but it has given me problems entering the recovery every time I tried. has a bug with wasap application, when you select notification tone, it goes to "themes"
    This application warns that it may crash with custom roms.

    It is not critical… .sino that I prefer to notify so that they can fix it. a salute

    1.    nahuel said

      it is not recommended to install these roms. I am eager to install jelly bean to my advance but until there is something stable, I do not install anything

  15.   round said

    Does it work for the I9070?

    1.    Francisco Ruiz said

      No friend
      On 26/09/2012 05:19, «Disqus» wrote:

  16.   Fabiola said

    Does this ROM also work for a Galaxy S i897 Captivate?

  17.   Lucas said

    I need to put a file on SD card to install the ROM but I don't have access to the phone… .how do I do ???? Please help that I am without a phone, thank you.

    1.    Francisco Ruiz said

      Try to do it from the recovery by mounting the storage from, ounts and storage and then mount usb storage or mount sdcard

      2013/3/27

      1.    Lucas said

        Francisco will tell you what happened to me: through Odin I did the entire flashing process, enter the corresponding files (pit, bootloader, pda, phone and csc). In the last part of the process, enter Recovery mode and press "wipe data / Factory reset" and then "wipe cache partittion", and when I wanted to go to install from zip sdcard I remembered that I did not have the file in the root directory of the phone.
        Now the cell phone when it turns on it stays on the SAMSUNG main screen and does nothing.
        What can I do to get my phone working again ????
        I will be very grateful if you can help me as I am going crazy.
        Greetings.