The mobile phone over time has become like a Swiss army knife, becoming an important element given the many utilities it has. Thanks to its cable connection or the two connections of the device, it can be used as a control, as a flashlight and even to watch television.
This all-in-one evolves favorably thanks to its hardware and its software, which is important if you want to compete against one of its main competitors, iOS. imagine power connect mobile to projector, playing any content on them without the need to use a laptop or desktop computer.
We are going to explain how to connect the mobile to the projector in all ways, options that will vary depending on the smartphone you are using at that time. Many terminals do not always have infrared, some manufacturers choose to equip this, which is ultimately an interesting utility.
With cable or without it?
The million dollar question is whether or not to use a cable when connecting the phone to the projector, this connection always works in most cases. Connections have always been made with it, so if you decide to spend a few euros, you have a wide variety on the Internet.
When using cables you are going to depend a lot on what you measure, the measurements are not too big, so this can be a big problem. If you use it as a projector control, it is best that you can use it comfortably in your hand and not have to leave it plugged in out of reach.
Using a wireless connection will always be a success, for this there are many variants, among which connections such as the WiFi connection appear. It is essential to pair the device with the other device to interact and play, for example, an image, a movie or a slide.
Connect the mobile to the projector by cable
The first method and one of the most reliable is to use the cable, the connection between the phone and the projector will be through an adapter. It is a small outlay that we have to make, the prices will vary, one of the ones that works quite well is the Niaguoji Jsdoin adapter.
For less than ten euros we have a USB-C to HDMI adapter, It is compatible with Thunderbolt 3 and has video audio output for MacBook Pro, MacBook Air and Samsung. To connect this cable to the phone, to then do it later in the project, it is done as follows:
- The first and fundamental thing is to have purchased this adapter from Amazon or from another site, its price is 8,99 euros and you can buy it a little further down
- Connect the adapter with the USB-C cable to the phone and in the other end you have to connect an HDMI cable, while the other end will go to the projector, connect the projector to a wall and play the content, whether it's a video, an open document or even a still image, nothing else will be needed for this to work
- HDMI converter: USB type C to HDMI adapter to connect a PC, laptop, smartphones or tablet to a...
- Plug & Play: No driver or additional software required. You can use the USB-C to HDMI adapter for meetings...
Connect the phone via USB
Many projectors on the market have a USB port, take advantage of this to make the phone a storage unit, as if it were a flash drive or a hard drive. The connection will be made with the cable that we use with the charger, which has a USB-C tip and the other standard USB.
To project any file we will do it from the same projector, opening any of the files that we have on our smartphone. This is usually a reliable way, many projector models have a USB port, which allow you to connect any storage unit.
To connect the phone via USB, do the following:
- The first and fundamental thing is to check that your projector has a USB port on one of its sides
- After checking this, remove the USB-C-USB cable from the charging station, to use it with the phone via USB-C and the other end will be plugged to projector port
- It will confirm the phone is connected to the projector and the projector will be able to play photos, videos and documents quickly, for this we will use the device's control to go faster, we can also click on the phone if what you want is to play that file
Wireless connection between phone and projector
In the market you have different models of projects with WiFi technology, the connection process is very easy and requires pairing the two devices. The recognition is usually fast, so we will be able to do it with just a few touches and without the need to use any type of cable.
With this we will save ourselves having to acquire any special adapter, in addition the comfort of reproducing happens by sending the files to the projector directly. Many projectors have an application with which to connect to it and be able to use the mobile as a command.
Projector manufacturers usually upload the official app to the Play Store, although going to the page is another option we have. The connection is made as follows, all manually:
- Connect the projector as usual, it's on
- Activate the WiFi from the options, for this you must access the settings and verify that it becomes ON
- Now, from our phone follow the step by step, by first entering Settings – Connections – Connected devices or send
- Search for the projector among the devices that appear, the brand and the specific model usually appear
- If you find it click once on the name and wait for it to pair, this usually takes a little under a minute at most
Use Chromecast as a router
Google Chromecast can make your projector to be able to send videos and watch services such as Netflix, YouTube, HBO Max, among others available. The connection is fast, also we are going to need a device and connect it through an HDMI to the other port.
You can send any image that appears, so it is ideal if you are looking to see it in a larger size and without the need for a television. Once the HDMI is connected it will be recognized and we can use the Chromecast command or the mobile phone to interact.
