It is not the first time we have seen the possible design of the OnePlus 7. Until now, we expected a model with a triple camera system, something quite new in the company's devices, but now we can confirm what the next flagship will look like. the Shenzhen-based firm. And the thing is, a series of covers have been leaked that make it very clear what the OnePlus 7 design.
Yes, it is still a leak, so it could be a fake, but there are several details that make us think that we are looking at the design of the OnePlus 7. To begin with, this model bears a great resemblance to the OPPO F11 Pro, something quite common on the brand, since both manufacturers belong to the same conglomerate. If we add to this the quality of the images, which correspond to official cases, they make it quite clear that this will be the appearance of the expected model.
An all-screen terminal, without a trace of notch ... or a 3.5 mm jack
As you can see in the different images that accompany the article, we find several very interesting details in terms of the design of the OnePlus 7. To begin with, at the top we find a sensor that, most likely, will do the functions of infrared, so that we can use the phone as if it were a remote control.
To this must be added the curious opening located in the same area. This is where the OnePlus 7 front camera. Yes, the phone would bet on a retractable solution to prevent a notch from breaking the aesthetics of the screen. A risky design but that, at the very least, makes a difference compared to its competitors. On the sides of the terminal we see few new features: the phone's on and off button, volume control key and another dedicated button that we can configure to open the application that we most want.
Moving to the bottom, is where the phone's USB Type-C charging port will be located, as well as the OnePlus 7 speaker and the nanoSIM card slot. The surprise? That there is no 3.5mm audio output either. A big disappointment, really. Although it was not something we did not expect. And we cannot forget its rear, totally clean, and whose main novelty was the fact that it has a triple camera system together with an LED flash. It seems that the manufacturer is going to bet very hard on the photographic section.
And what about the front? Here we see another quite interesting evolution. For starters, the model does not have any kind of notch on the screen, so the aesthetics are not broken and it gives the device a greater all-screen phone feel. Much of this merit goes to the total lack of frames on the sides, we only see a slight lower frame. In addition, how could it be otherwise, the design of the OnePlus 7 will include a fingerprint reader integrated into the screen of the device, an essential in phones that want to become part of the highest range in the sector.
More details on the possible features of the OnePlus 7
As for the hardware that this terminal will mount, we will start talking about the OnePlus 7 screen, formed by an AMOLED panel with a 6.4-inch diagonal and Full HD + resolution. To this, we must add the jewel in the crown of Qualcomm, the Snapdragon 855 processor along with an Adreno 640 GPU and 8 GB of RAM, in addition to different internal memory configurations that will go from 128 to 512 GB.
The rear camera would be made up of a triple lens system with a 48-megapixel first sensor, a 20-megapixel wide-angle and a 5-megapixel telephoto lens, without forgetting the front retractable camera that would have 16-megapixel resolution. To finish with the possible hardware that the OnePlus 7 will have, say that it will most likely arrive with Android 9 Pie under the manufacturer's custom OxygenOS layer, in addition to having a mammoth 4.000 mAh battery with fast charge that would be responsible for supporting all the weight of the hardware of this future flagship killer. And to you, what do you think of OnePlus 7 design?